1. Correct starting and starting: When the engine is started cold, due to low temperature, high oil viscosity, and poor fluidity, the oil pump may not supply enough oil. At the same time, the oil on the original cylinder wall flows down along the cylinder wall after parking, so it does not receiv...

The inner surface of the ceramic cylinder liner is directly affected by high-temperature and high-pressure gas, and always experiences high-speed sliding friction with the piston ring and piston skirt. The appearance comes into contact with cooling water, causing severe thermal stress under large...

With the continuous development of various industries, the 3NB1300C/1600 cylinder liner of Lanshi pump has gradually been widely used. So in the application process, the deformation of the 3NB1300C/1600 cylinder liner of Lanshi pump is an important problem that troubles drivers. Today we will int...